MAIN PRODUCT

DEVELOPMENT TOOLS(HARDWARE)

PIC In-Circuit Debugger/Programmer (USB)

-  PIC-ICD2 A reliable, low cost and useful development tool for Microchip PIC microcontrollers embedded system development. This ICD can do in-circuit debugging as well as ISP programming. Connects to PC via the USB interface. Uses the Microchip MPLAB for control. Support most PIC devices up to 40 pins. (Refer to product brochure for device supports)
Low Cost PIC Programmer (USB)

-  PIC-PRG2 A reliable, low cost and portable USB programmer for the Microchip PIC microcontrollers. Windows based GUI software. On-board 40 pins ZIF programming socket. Built in ICSP programming interface. (Refer to product brochure for device supports).
Low Cost AVR Programmer (USB)

-  AVR-PRG2 A reliable, low cost and portable USB programmer for the ATMEL AVR microcontrollers. Windows based GUI software. Built in ISP programming interface with cable.

Handy PIC Writer/Programmer

-LEAP PSTART A reliable and portable writer/programmer for the Microchip PIC microcontrollers. Compatible with the Microchip MPLAB IDE. On-board 40 pins ZIF programming socket. Supports RS232C interface.
Handy 8051 Microcontroller Programmer

- LEAP Leaper-5E A reliable and portable writer/programmer for the 8051 family microcontroller devices. Features windows based GUI. On-board ZIF programming socket. USB interface to computer. Able to operate using batteries or AC-DC adapter. (Refer to product brochure for device supports)

E/EEPROM/Flash Programmers:

- LEAP Leaper-3C A reliable and portable programmer for EPROM/EEPROM and flash EPROM. Can be used as standalone or PC control via windows based GUI. On-board ZIF programming socket. USB interface to computer. Able to operate using batteries or AC-DC adapter. (Refer to product brochure for device supports)
- LEAP Leaper-3D A reliable and portable programmer for EPROM/EEPROM and flash EPROM. PC control via windows based GUI. On-board ZIF programming socket. USB interface to computer. Able to operate using batteries or AC-DC adapter. (Refer to product brochure for device supports)

Universal Device Programmers:

- LEAP Leaper-48 A reliable and portable universal device programmer for most programmable devices such as EPROMs, EEPROMs, flash EPROMs, serial E/EEPROM, microcontrollers, PLDs & etc. PC control via windows based GUI. On-board 48 pins ZIF programming socket. USB interface to computer. Able to detect device pin’s errors or wrong insertion.

- Labtool-48UXP An intelligent universal device programmer for most programmable devices such as EPROMs, EEPROMs, flash EPROMs, serial E/EEPROM, microcontrollers, PLDs & etc. PC control via windows based GUI. On-board 48 pins ZIF programming socket. USB or parallel interface to computer. Able to detect device pin’s errors or wrong insertion.

- LEAP SU-300 A reliable standalone universal device programmer for most programmable devices such as EPROMs, EEPROMs, flash EPROMs, serial E/EEPROM, microcontrollers, PLDs & etc. Also supports PC control via windows based GUI. On board changeable programming socket, supporting different devices of various cartridge & adaptors. Parallel port interface to computer. Able to detect device pin’s errors or wrong insertion. Supports auto search.

Gang Programmers:

4 Gang Programmer

- LEAP SU-6000 The latest 4 gang programmer for high density NAND/NOR Flash memory. Supports very fast programming speed. Able to detect device pin’s errors or wrong insertion. PC control via windows based GUI. USB interface to computer. Supports a wide range of device sockets such as TSOP, TSSOP, SOP, SSOP, PLCC, VSOP, BGA, uBGA & etc.

8 Gang Programmer:

- LEAP SU-2000 An 8 gang high speed and modular gang programmer, operates standalone or PC based. Able to detect device pin’s errors or wrong insertion. Auto search function. PC control via windows based GUI. Parallel interface to computer. Supports a wide range of device sockets such as DIP, TSOP, TSSOP, SOP, SSOP, PLCC, VSOP, BGA, uBGA & etc.

- LEAP SU-3000 An 8 gang modular programmer, operates standalone or PC based. Able to detect device pin’s errors or wrong insertion. Auto search function. PC control via windows based GUI. Parallel interface to computer. Supports a wide range of device sockets such as DIP, TSOP, TSSOP, SOP, SSOP, PLCC, VSOP, BGA, uBGA & etc.

- Programmers’ Device adapters/converters for SMDs A wide range of converters or adapters are available for programming SMDs devices using device programmer/writer, such as DIP, PLCC, TSOP, SDIP, SSOP, QFP, PQFP, TQFP, SOP, SSOP, SSOJ & etc.

Emulators:

4MB ROM Emulator (USB)

- LEAP WICE-M4 Light, portable, low cost and user friendly tool for ROM/EPROM emulation. Supports 2K to 512K devices. Just plug unit to computer USB ports without external power. GUI software interface running under Win 9x/ME/2000/XP. Able to detect device pin’s errors or wrong insertion. Input protection. Optional 32-pin PLCC supports.

Flash Emulator (USB)

- LEAP WICE-ME – SPI/FWH One of the latest emulator that supports the new flash ROM technology. Support SPI or FWH protocols (Please state when ordering). Support 1.8V to 3.3V devices. USB interface. Able to detect device pin’s errors or wrong insertion. Input protection. Optional 32-pin PLCC supports.

8051 In-Circuit Emulator

- LEAP WICE-8052 An emulator for the 8051 device series. Supports 80(C)31/32, 80(C)51/52, 87(C)51/52, 89(C)51/52. USB port interface with host PC. 128KB of simulation memory. Supports real time emulation up to 40MHz with GUI software(multi windows, point & click, menu driven function, online help).

Universal JTAG/ISP Programmer

- LEAP UDT-1 An universal JTAG/ISP programmer for CPLDs/FPGAs by ALTERA, ATMEL, XILINX, Lattice & etc. Parallel port interface for high speed programming. Compatible with CPLD/FPGA vendor’s system for design, compile, simulate, debug & data downloading.

Logic Analyzers:

- LEAP LA-2025/ LA-2050 User friendly and affordable 32 channels standalone logic analyzer with TFT color LCD screen. Timing analysis is 250MHZ(LA-2025) and 500MHz(LA-2050). Also able to connect to PC via USB port for control, waveform capture & etc. Settings/waveform can be stored or recalled. Supports bus analysis, glitch capture, various triggering patterns, trigger counter, pulse wide triggering & etc.

- LEAP PLA-1016/PLA-2532 A range of low cost PC based logic analyzer featuring 16 channels(PLA-1016) and 32 channels(PLA-2532) inputs. Timing analysis is 100MHz (PLA-1016) and 250MHz (PLA- 2532). Also able to connect to PC via USB port for control, waveform capture & etc. Settings/waveform can be stored or recalled. Supports bus analysis, glitch capture, various triggering patterns, trigger counter, pulse wide triggering & etc.

EPROM Erasers:

- LEAP LER-121A/LER-123A Low cost UV EPROM eraser with robust and portable construction. Comes with an electronic starter and timer control circuitry (with alarm). Power automatically cut off when drawer opens. Timer setting range: 0 to 60 minutes. Incorporate power UV lamp tube for efficient exposure. Device erasing at one time: 12 pcs x 24 pin devices (LER- 121A), 64 pcs x 24 pin devices(LER-123A). 0perational manual included.

DEVELOPMENT SOFTWARE:

- BASIC Compilers, C-Compilers, Simulators, IDE, Assemblers for various microcontrollers .

MICROPROCESSOR TRAINERS

68000 Microprocessor Trainers:

-  uP-68K Based on the Motorola 68000 16-bit CPU. PC menu driven interface via RS232C. Supports on-board basic I/O interface. On-board ROM and RAM with peripherals IC like 68230 PI/T, 68681 DUART & etc. Supports battery powered RAM, Digital IC testing, faults simulation & etc. Can be connected to an optional experiment board (68K EXP-AP) for various I/O application interface programming such as digital I/O, DC motors, stepper motors, traffic lights, buzzer, 7-segment LEDs, dot-matrix LED, keypad, LCD, ADC, ADC & etc.
- ESA 68K-2 Based on the Motorola 68000 16-bit CPU. PC control interface via RS232C. Supports on- board basic I/O interface. On-board ROM and RAM with Motorola peripherals. A wide range of separate interface modules are available with this kit such as logic controller, 7- segment LEDs, traffic lights, ADC, DAC, stepper motor, DC motor, keypad, LCD & etc.

8085 Trainers

- ESA 85-2 8085 microprocessor trainer with keypad, 7-segment LEDs, EPROM programmer, RS232C, printer port, built in editor, assembler & dis-assembler. A wide range of separate interface modules are available with this kit such as logic controller, 7- segment LEDs, traffic lights, ADC, DAC, stepper motor, DC motor, keypad, LCD & etc.

- ESA MPS 85-3 8085 microprocessor trainer with keypad, 7-segment LEDs, battery backup RAM, RS232C, Windows/DOS drivers, built in editor, assembler & dis-assembler. A wide range of separate interface modules are available with this kit such as logic controller, 7- segment LEDs, traffic lights, ADC, DAC, stepper motor, DC motor, keypad, LCD & etc.

-  uP-8085 Based on the 8-bit 8085 CPU. Includes compatible peripherals such as 2 x 8255, 8251, 8279, 8253 & etc. Supports RS232C interface, built-in keypad for direct code entry/edit, stepping, breakpoint settings, executing. Digital IC tester utility in firmware. Allows direct hex code downloading from PC. Can be connected to an optional experiment board (8085 EXP-AP) for various I/O application interface programming such as digital I/O, DC motors, stepper motors, traffic lights, buzzer, 7-segment LEDs, dot-matrix LED, keypad, LCD, ADC, ADC & etc.

8088/8086 Trainers:

- MICROPORT BGC-8088 A versatile & robust standalone trainer based on the 8088 CPU. This kit can also be linked to a PC via RS232C for hex code upload/download. Features a complete keyboard style keypad and LCD for data input & viewing. Incorporates 8088 compatible peripherals like 8279, 8259, 8253, 8255, 8251 & etc. Battery backup RAM supports. A wide range of separate interface modules are available with this kit such as basic I/O, temperature control, ADC, DAC, stepper/dc motor, dot-matrix & etc.

- ESA 88/86-2 A versatile and reliable microprocessor trainer supporting both the 8088 and 8086 CPU. Built-in keyboard, 7-segment LEDs, 8MHZ clock, 48 I/O lines, RS232C interface and Windows/DOS drivers. A wide range of separate interface modules are available with this kit such as logic controller, 7-segment LEDs, traffic lights, ADC, DAC, stepper motor, DC motor, keypad, LCD & etc.

- ESA 88/86-3 A versatile and reliable microprocessor trainer supporting both the 8088 and 8086 CPU. Built-in DAC, LCD, RS232C interface, PC keyboard interface, provision for ADC, RS485 & etc. Includes Windows/DOS drivers. A wide range of separate interface modules are available with this kit such as logic controller, 7-segment LEDs, traffic lights, ADC, DAC, stepper motor, DC motor, keypad, LCD & etc.

. MICROCONTROLLER TRAINERS & DEVELOPMENT KITS

-  uC-8051 Based on the 8051 microcontroller with built-in 48 I/O lines, keypad interface, LCD,
digital input switches, output LEDs, battery backup RAM, RS232C ports, logic probe &
etc. Supports faults simulation. Can be connected to an optional experiment board (8051
EXP-AP) for various I/O application interface programming such as digital I/O, DC
motors, stepper motors, traffic lights, buzzer, 7-segment LEDs, dot-matrix LED, keypad,
LCD, ADC, ADC & etc.

-  uC-68HC11 Based on the Motorola 68HC11 microcontroller with built-in interface chip, keypad
interface, LCD, digital input switches, output LEDs, battery backup RAM, RS232C ports,
logic probe & etc. Supports faults simulation. Can be connected to an optional
experiment board (68HC11 EXP-AP) for various I/O application interface programming
such as digital I/O, DC motors, stepper motors, traffic lights, buzzer, 7-segment LEDs,
dot-matrix LED, keypad, ADC, ADC & etc.

-DRAGON12-P 68HC12 Kit Based on the 16-bit Motorola 68HC12 (MC9S912DP256) microcontroller with built-in,
keypad, LCD, 7-segment LEDs, digital input switches, output LEDs, battery backup RAM,
RS232C ports, ADC, RTC, IR, buzzer & etc.

-  PIC-DK08 Based on the popular Microchip PIC microcontrollers. Comes with a built in serial device programmer and on-board interface application such as digital input switches, output LEDs, buzzer, LCD, keypad & etc. This board can accommodate 18 pins to 40 pins PIC devices. A great kit for learning PICs and as a development platform.

-  PIC-DK08-EX This model combines the above PIC-DK08 together with an experiment board (PIC EXP-AP) to demonstrate more microcontroller application interface capability. This PIC EXPAP board consists of a wide range of interface modules such as DC motor, stepper motor, ADC, DAC, dot matrix LED, traffic lights and etc. -  PIC-DK09A A popular PIC microcontroller training and development kit that accepts 18 pins to 40 pins PIC devices. It also features a built-in USB PIC programmer. Includes on-board interface application such as digital input switches, output LEDs, buzzer, LCD, keypad, 7segment LEDs, I²C, servo motor interface & etc. A very popular kit for training & development.

-  PIC-ATS800 An advanced PIC microcontroller trainer that features a lots of application or interface modules such as switches, LEDs, buzzer, 7-segment LEDs, dc motor, stepper motor, servo motor, industrial geared DC motor, temperature sensor, humidity sensor, RTC, rotary encoder & etc. The overall system comes with a main target board, an USB programmer & a wide range of experiment boards. A complete system for learning PIC microcontrollers programming & interfacing.

-  uC-68HC908 V2 Based on the Freescale(formerly Motorola) 68HC908 microcontroller. A suitable kit to
learn and develop programs based on a simple and basic Freescale microcontroller. On
board features include RS232C download interface, digital input switches, output LEDs,
buzzer, LCD, keypad, 7- segment LEDs & etc.

-  AVR-DK20A Based on the on of the latest microcontroller called the AVR from ATMEL. This system includes a USB AVR programmer and a development board that demonstrates the interfacing capability of the AVR. This board can accept 20 pins, 28 pins and 40 pins AVR devices. Board features AVR ISP interface, digital input switches, output LEDs, buzzer, LCD, keypad, 7- segment LEDs, servo motor interface & etc.

-  89S5x-DK10 This board is based on the well renowned 8051 microcontroller and it features the latest 8051 series of family devices supporting ISP. This board accepts 8051 ICSP devices such as 89S51, 89S52, 89S53, 89S8253 & 89S2051. Board includes ICSP programmer, digital input switches, output LEDs, buzzer, LCD, keypad, 7- segment LEDs interface, RS232C.

- LEAP LP-2900 + LP-ARM9-2410 This system combines allows the studies of ARM microcontrollers to interface with various application I/O devices such as switches, LEDs, LCD, keypad, bi-color dot matrix, ADC, DAC & etc. Programs sample given in C or assembly. Featuring the Samsung ARM9 S3C2410X CPU.

- ARM7 S3CEV40 Microcontroller Kit This kit is based on the Samsung ARM7 S3C44B0 Processor. Suitable for developing hand-held application programs like the PDAs. This board features interfaces like 10 BaseT, USB, RS232C, LCD & keypad interface, keypad, Jtag, IDE & etc. An optional LCD and keypad can be attached. Supports boot code, ucLinux and uCos. Advance development software available as option.

- ARM9 S3CEB2410 Microcontroller Kit This evaluation board is based on the Samsung ARM9 S3C2410X (ARM920T) Processor. Suitable for developing hand-held application programs like the PDAs. This board features interfaces like input buttons, LED indicators, 10 BaseT, USB host/device, LCD interface, MMC, Jtag, MMC, I²C interface & etc. An optional touch panel LCD can be attached. Able to run on both Embedded Linux or WinCE. Advance development software available as option.

- DIGITAL TRAINING SYSTEMS 8-Bit Digital Lab Trainer:
- DT-08M This digital trainer is able to support both CMOS & TTL digital levels. Consists of built-in power supplies, digital input switches, output LEDs, selectable pulse generator, breadboard, logic probe, pulse switches, RC timer, flip flops interface, digital multimeter & etc.

- DT-09M A suitable digital trainer cater for digital circuits prototyping and construction. Consists of digital multimeters, built-in power supplies, digital input switches, output LEDs, waveform generator, breadboard, logic probe, pulse switches, RC timer, flip flops interface, function switches & etc.

16-Bit Digital Lab Trainer

-  DT-16 A suitable digital trainer cater for advance digital circuits prototyping and construction. Consists of 16-bits inputs switches, 4 data switches, 16 output LEDs, built-in power supplies, pulse generator, breadboard, logic probe, pulse switches, RC timer & etc.
Digital Lab Training System complete with experiment modules

-  DTS-300B This system combines the DT-16 unit with a wide range of experiment modules to cover digital experiments, from basic till advance. Experiment coverage includes basic logic gates, combination digital circuits, flip flops, encoders, decoders, sequential circuits, counters, memory, microcontrollers, ADC, DAC, digital application circuits and etc.
Advance Digital-Analogue Lab Trainer

-  DAT-200X Used as a base catering for both digital & analogue circuits prototyping and construction. Consists of digital multimeters, built-in DC/AC power supplies, digital input switches, output LEDs, waveform generator, breadboard, logic probe, potentiometer, switches, speaker & etc.